| Now we have a pipe with a 90 degree bend in it. Now click the sweep tool again and change the Y rotation value back to 90 degrees. Right click on the sweep tool and set the Z value to 5 and press return. You should now see the sweep with the new length. | |
| Click the sweep tool and change the z value in the property panel back to 0.5. |  |
| Grab the rotation handle on the swept face and move it so the Y rotation is 75 degrees. |  |
| Click the sweep tool 5 more times until you have another 90 degree bend. |  |
 |
 |